Financing is not available for pre-owned units

Condition:

Functional: This machine has been previously owned, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device may have some signs of cosmetic wear and/or structural damage, but is fully operational and functions 100% as intended.

Good: This machine has been previously used, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device may have some cosmetic wear and/or signs of use but is fully operational and functions 100% as intended.

Great: This machine has been previously used, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device has minimal signs of use but is fully operational and functions 100% as intended.

PLEASE NOTE: The images shown in this listing do not fully represent the cosmetic condition of the machine.

OMTech Certified:

This machine has undergone a thorough QA inspection by an OMTech Specialist, and each component has been repaired and tested for full operational performance.

Photo Guide:

View condition examples of previous Pre-Owned models: 

Safe Shipping:

This unit is carefully secured to a reinforced pallet and protected with several layers of bubble wrap for a dependable delivery.

SPECS:

• Laser Source: RECI

• Laser Type: Continuous Wave
• Input Power: 110-220V~60 Hz
• Total Power Consumption: 8000W (66.7 A)
• Rated Laser Power: 1500W
• Est. Service Life (MTTF): 100,000 hr.
• Laser Wavelength: 1080±3 nm
• Laser Frequency: 1-20 kHz
• Scanning Width Range: 0.04-11.8 in. (1-300 mm)
• Scanning Height Range: 0.04-7.8 in. (1-200 mm)
• Max. Scanning Speed: 1180 ips (30 m/s)
• Focal Range: 6.3-19.7 in. (160-500 mm)
• Chiller Cooling Power: 4100W
• Chiller Heating Power: 400W
• Tank Volume: 3.2 gal. (12 L)
• Overall Dimensions: 47 x 24.4 x 41.3 in. (119.5x62x105 cm)
• Laser Cable Length: 29 ft. 6 in. (9 m)
• Power Cord Length: 16 ft. 5 in. (5 m)
• New Weight: 595 lb. (270 kg)

Cutting Edge Features:

• CONTACTLESS LASER CLEANING: OMTech's laser cleaner boasts a powerful 1500W RECI CW fiber laser source to provide up to 100,000 hours of effortless, contactless, and chemical free cleaning
• INTUITIVE CONTROLS: Enjoy complete control close at hand thanks to the secondary touchscreen controller on the laser head and quickly toggle through the 7 scanning modes to meet all your cleaning needs
• EFFICIENT COOLING SYSTEM: Our laser rust removal machine features Hanli's 4100W 3.2 gallon water chiller with R410a refrigerant that dissipate excess heat and keeps things humming along
• HELPFUL ACCESSORIES: The rolling head holder bracket offers stable motion and perfect 50 cm focal distance on flat surfaces; the shoulder strap eases repetitive work by reducing arm fatigue; and the extra long cables and locking casters make it a breeze to move around
• ALL-AROUND SAFETY: The distance and temperature sensors automatically kill the laser to avoid distant lasing or overheating; the large emergency stop allows instant power cutoff; and the provided OD6 laser eyewear and face mask protect your eyes
• WIDE APPLICATION: This innovative grime buster handles a wide range of cleaning jobs, removing mill scale and solder dross, rust, paint, oils and grease, and other contaminants to clean steel, aluminum, brass, stone, masonry, and much more

Package Includes:

• 1 x Main Cabinet

• 1 x Laser Head Gun
• 1 x 1500W Laser Source
• 1 x Water Chiller
• 1 x OD6 Laser Eyewear
• 1 x Face Mask
• 1 x Shoulder Strap
• 1 x Protective Laser Lens Cover
• 4 x Spare Protective Lenses
• 1 x Wheeled Support Brace
• 1 x RS232 Cable
• 1 x Collimator Cover
• 1 x Drain Tube
• 4 x Laser Keys
• 2 x Cabinet Access Keys
• 2 x Rear Access Door Keys
• 5 x 5 Lens Wipes
• 1 x CD-ROM with Diagnostic Software
• 1 x USB Drive
• 1 x Terminal Block
• 1 x Screwdriver
• 1 x Tool Box
• 1 x Eyewear Bag
• 1 x Instruction Manual

OMTech Certified Warranty:

• Great: 1-year parts warranty on pre-owned fiber laser machines
• Good: 6-month parts warranty on pre-owned fiber laser machines
• Functional: 3-month parts warranty on pre-owned fiber laser machines

Certifications:

• FDA Compliant
• CE Certification
• ISO9001 Quality Certification
• One 45-minute Virtual Tech Support appointment with OMTech Specialists in Anaheim, California

Effortlessly remove grease, oil, mold, stone lichen, solder dross, mill scale, rust, and more with OMTech's innovative laser cleaner!

Equipped with a powerful RECI 1500W continuous wave fiber laser source, this modern grime buster offers up to a massive 100,000 hours of contactless automated cleaning service, while the integrated 3.2 gallon Hanli water chiller keeps everything cool and humming along. Our advanced laser head with a secondary touchscreen panel provides convenient control over the 7 scanning modes as the 1080 nm beam works its magic at 1 to 300 mm (0.04" to 11.8") width at speeds up to 1180 ips.

Easily clean irregular surfaces with the 29'6" long cable and user-friendly handheld laser head or attach it onto the rolling bracket to enjoy stable and labor saving operation on flat surfaces at perfectly precise 50 cm focal distance. Safe as can be, this fiber laser rust remover can lock its main control panel via the included keys; automatically cuts off the laser in case of distant lasing or overheating; and offers a large E-stop in case of emergencies. When your work is done, just unlock the casters and wheel it anywhere you want for easy storage and transport.

NOTE that this device has an open laser head. It comes with one pair of protective eyewear and a face mask, but anyone else in the room with the device should also have their own laser glasses to avoid any possibility of injury from its beam. This device is extremely power intensive and care must be taken to only use it with electrical circuits able to safely meet its requirements. For best results, accessories such as pressurized air assist, fume extractor, protective shielding, mechanized controller can be additionally configured.

Compatible Materials:

• Acrylic
• Hard Plastics
• Brick
• Granite
• Marble
• Tile
• Aluminum
• Gold
• Silver
• Stainless Steel
• Brass
• Titanium
• Tungsten

*Contact us with questions on specific materials not listed, we can process a sample for confirmation. Some PVC-based acrylics can create toxic fumes when lasered.